Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Hornsby Bend
Dryer vent cleaning in Hornsby Bend typically runs $185 to $320 for a standard single-dryer home, with the work usually completed in 60 to 90 minutes. If you’re off Hunt Lane or down a gravel road toward the Colorado River, count on us to treat the visit as a full diagnostic, not a quick brush-through. Your dryer’s exhaust path is a combustion-adjacent system, and in a community where most vents were never inspected by a building official, a camera-first approach matters more than speed. Call (866) 472-2513 and we’ll schedule a time that fits your week. This is what we do every day: Dryer Vent Cleaning that actually verifies airflow, not just the absence of visible lint.
Why Oakgrove Chimney Sweep Is Hornsby Bend’s Preferred Dryer Vent Cleaning Company
We know what’s behind the skirting on a manufactured home in Hornsby Bend, and we know what happens when a 2010s ranch-style build had its dryer vent added by the homeowner on a Saturday with foil flex and no permit. Our reputation in the 78725 area is built on finding the crushed transitions, the sagged runs, and the pest nests that other companies never look for. Glen Whitaker, who leads Oakgrove Chimney Sweep, trains our team to treat every dryer vent as a fire-safety pathway, not a side job.
Hornsby Bend has no local fire marshal and no municipal inspection backlog for vent terminations. That’s not a criticism; it’s a fact of living in an unincorporated part of eastern Travis County. It means the responsibility for verifying a dryer vent falls entirely on the homeowner, and we take that seriously. When customers in Hornsby Bend call us, they’re typically calling after a thermal fuse tripped, a first-fire attempt failed, or a neighbor’s vent fire got their attention. We show up with cameras, not just brushes.
We work with professional-grade materials: DuraFlex for replacement runs, Famco components for terminations. Not hardware-store foil. For full-service accountability across chimney sweeping, repair, and dryer vent work, see our Hornsby Bend service area page and call (866) 472-2513. We repair what we find.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Hornsby Bend
Dryer Vent Cleaning
We clean the entire vent path: from the dryer’s transition fitting, through the wall or floor chase, all the way to the exterior termination. In Hornsby Bend, that path is rarely a straight 15-foot run. It’s more often a 30-plus-foot journey through a belly chase, around a corner at the skirting, or up through an attic chase on a custom rural build. We brush and vacuum the full length, and because we’re chimney-trained, we check termination clearances the way a fire-protection specialist would.
Level 2 Camera Inspection of the Vent Path
A camera inspection is how this job starts in Hornsby Bend, not an add-on we pitch halfway through. The camera shows us what a brush misses: flattened elbows, separated foil seams, lint packed against a crushed section behind the skirting. We review the footage with you before we call anything done. You see the collapse point on the screen; you see the airflow restored when we’re finished. No camera, no claim. A Level 2 inspection is the only way to verify a vent that has never been inspected.
Vent Run Re-Support and Transition Repair
When a vent sags, it traps lint. When a transition fitting gets crushed during a floor install or a skirting repair, it chokes the airflow. On manufactured homes off Hog Eye Road and near the community’s larger acreage lots, we routinely find runs that have worked themselves loose or been pinched by a settling pad. We re-support the run with proper hangers, replace crushed transitions, and when the run is too far gone, we spec a DuraFlex replacement that actually drafts. This is not a brush-and-run service; we fix what we find.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hornsby Bend
We stock and install Famco termination components and DuraFlex transition and vent materials because those are the brands that hold up under central Texas heat and the occasional hard freeze. Copperfield hearth components show up in custom builds around Hornsby Bend, and we’re familiar with how they integrate into laundry rooms and utility closets. When we tell you a vent section needs replacing, you get a professional-grade part, not a big-box substitute. And because we carry these materials on the truck, most repairs in the 78725 area happen during the same visit.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Hornsby Bend Homes
- Long foil-flex runs through bellies and chases: The original 1990s and 2000s manufactured homes in Hornsby Bend often have vent runs well beyond the 25-foot code maximum, with kinks and sags that trap oak-and-pecan lint. If the dryer is on an interior wall and the termination is at the skirting, that run was likely never inspected by anyone, ever.
- Crushed transitions behind the dryer: Dryers get pushed back against the wall, the transition gets flattened, and airflow drops by half before the vent even leaves the room. We see this consistently in Hornsby Bend laundry rooms, especially on ranch-style builds where space is tight and the dryer sits at an angle.
- Pest nests in idle summer vents: Central Texas summers mean the dryer still runs, but the vent’s exterior termination can sit quiet for long stretches if the home is seasonal or the dryer is rarely used. Wasps and rodents move in. When fall arrives, the first heavy drying load pushes all that heat into a blocked run.
- Unpermitted terminations against skirting or fascia: Without a local fire marshal in Hornsby Bend, nobody required the original or added vent to terminate a safe distance from combustible siding or skirting. We find lint piled against the skirting and terminations pointed into dead air spaces under the home. That’s a fire risk most homeowners have never looked at.
Pricing for Dryer Vent Cleaning in Hornsby Bend, TX
A standard dryer vent cleaning on a typical Hornsby Bend manufactured home or ranch-style house runs $185 to $320. That includes the full-length cleaning and a camera inspection of the vent path. If we find a crushed transition that needs replacing or a run that needs re-supporting, we’ll quote the repair before we do the work: transition fittings are typically $35 to $75 installed; a full DuraFlex re-run on a longer chase can run $400 to $650 depending on length and access. Homes off Hunt Lane with long belly chases and difficult skirting access tend toward the upper end. The estimate is free, and you’ll see the camera footage before you approve anything. Call (866) 472-2513 and we’ll get you a firm number.
We Also Serve Cities Near Hornsby Bend
Our team regularly works in Garfield, Manor, Rollingwood, and Austin, so if you have a family member or rental property just outside Hornsby Bend, we can usually consolidate the visit. The vent problems in Garfield and Manor mirror what we see in 78725: older manufactured homes, long runs, and no inspection history. Glen Whitaker’s crew covers the whole eastern Travis County area with the same camera-first standard.
Serving Hornsby Bend, TX — Our Local Coverage Area
We’re based in the Hornsby Bend area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Hornsby Bend
In Hornsby Bend, nearly every dryer vent was installed or modified without a permit, so a camera is the only way to know what’s actually in the run. The camera shows crushed elbows, separated seams, sagged sections behind skirting, and lint packed in places a brush can’t reach. We don’t charge extra for the inspection; it’s part of the cleaning. If the run is clear, the footage confirms it. If it isn’t, you see the problem before we quote the fix. Call (866) 472-2513 to schedule a camera-first cleaning.
It depends on how long the run is and whether the termination has proper clearance from the skirting. In Hornsby Bend, most skirting terminations were never inspected, and many are pointed into dead air or too close to combustible material. We’ll camera the full run, check the termination clearance, and show you exactly what needs to change. If the run is short and unobstructed, you may be fine. If it’s a 35-foot foil-flex snake, we’ll recommend a DuraFlex replacement and re-support.
Cleaning the vent restores airflow, which is the usual cause of thermal fuse trips, but the fuse itself will still need to be replaced by an appliance technician. We clear the vent path first so the new fuse doesn’t trip again on the first load. In Hornsby Bend, where long, kinked runs are common, a tripped thermal cutoff is often the first clue that the vent was never properly installed. We’ll verify the airflow after cleaning with a draft test and camera footage. Call (866) 472-2513 and mention the thermal fuse so we can schedule accordingly.
We treat it as a full diagnostic: camera the entire length, identify every sag, kink, and crushed section, then clean and re-support the run so it stays open. On acreage homes in Hornsby Bend, belly chases are common because the dryer sits on an interior wall and the vent runs under the floor to an exterior termination. We’ve seen wasp nests, mouse nests, and lint plugs in those chases. If the existing run can’t be made safe, we’ll quote a DuraFlex replacement and show you the footage before starting any repair.
They’re separate systems, but Oakgrove handles both, and most Hornsby Bend homeowners with a wood-burning fireplace or stove find it simpler to consolidate. Your chimney and your dryer vent share a common failure point: creosote and lint are both combustible residues that build up in an exhaust path. We sweep chimneys and we clean dryer vents, and we inspect both the same way: with cameras and combustion-safety standards. If you haven’t had either done in Hornsby Bend this year, call (866) 472-2513 and we can often handle both in a single visit.
Written by Glen Whitaker, Owner at Oakgrove Chimney Sweep, serving Hornsby Bend and eastern Travis County.