Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Hudson Bend, TX
Chimney repair in Hudson Bend usually means dealing with decades-old masonry on a Lake Travis waterfront lot, where the real problems hide behind years of light use. Many fireplaces in the 78645 zip code burn only a handful of weekends each winter, so flue damage from moisture, animal intrusion, and freeze-thaw cycles builds up quietly between inspections. Oakgrove Chimney Sweep has served Hudson Bend since 2017, and we repair what we find rather than handing you off to a third party. For a free estimate on chimney repair, call (866) 472-2513.
Why Hudson Bend Homes Are Different
Hudson Bend sits on a peninsula in Lake Travis, with a housing stock that dates mostly from the 1970s through the 2000s. The original homes were custom builds and lake houses, most of them centered around masonry fireplaces that were built well but have now seen forty or fifty years of Hill Country weather. A significant share of these properties are second homes or vacation rentals, which changes how chimneys fail. A fireplace in a full-time Austin residence gets burned regularly, and creosote buildup becomes the obvious issue. In Hudson Bend, we more often find fireboxes that sat unused for months, sometimes years, with flues that deteriorated from humidity and lake air rather than heavy burning.
The climate here accelerates a specific kind of damage. Hot, humid summers push moisture into masonry and mortar. When a rare winter hard freeze arrives, that trapped moisture expands and cracks flue tiles, crowns, and brickwork. Homes close to the water get the worst of it. Lake proximity means higher ambient humidity year-round, which contributes to rust on dampers and metal components, and creosote that does accumulate breaks down into a corrosive, acidic residue faster than it would in a drier climate. The result is that our repair work in Hudson Bend skews toward crown repair, flashing replacement, and flue liner restoration rather than routine soot removal. Your flue is a combustion system, and on Lake Travis, water is the system’s quietest enemy.
Another factor that shapes the work is the short-term rental market. Hudson Bend is now dominated by STRs and weekend properties. Chimney cleaning here is often scheduled as a pre-season turnover task before the first guest fire of the season, not as a primary heating necessity. That means we frequently encounter fireplaces that have not been burned much but have not been cleaned in years either. The real issue is rarely soot. It’s animal nests, cracked flue tiles, and rusted dampers that a turnover cleaning exposes but cannot fix. That’s why our inspections in Hudson Bend are thorough by default.
Styles & brands we work with
Our Main Hudson Bend Services
Two services account for most of the calls we take from Hudson Bend homeowners and property managers: chimney sweeping and dryer vent cleaning. Both are fire-safety services first, and both get complicated by the age of the housing stock and the intermittent-use pattern common to lake-area properties.
Chimney Sweep in Hudson Bend
A chimney sweep in Hudson Bend is less about removing heavy creosote and more about clearing what moved in while the house sat empty. Birds, squirrels, and wasps find unused flues quickly. When a property manager calls us before a rental’s first winter guest, we are as likely to pull a nest out of the flue as we are to brush out soot. The humidity near Lake Travis also breaks down whatever creosote does form into a sticky, corrosive glaze that needs more than a quick pass. Our sweep includes a full visual inspection of the firebox, damper, and flue, and if we find damage, we can assess it on the spot. Chimney Sweep in Hudson Bend covers the full scope of what a proper sweep involves.
Dryer Vent Cleaning in Hudson Bend
Dryer vent cleaning gets overlooked in rental turnovers because it is not visible the way a fireplace is. But a blocked dryer vent is a combustion-pathway fire risk, and in Hudson Bend, lake humidity makes lint clump and stick inside the duct instead of blowing through. Homes built in the 1980s and 1990s often have long, corrugated vent runs that trap lint fast. We treat dryer vent cleaning as a core fire-safety service, performed by chimney-trained specialists who understand airflow and exhaust systems. Dryer Vent Cleaning in Hudson Bend explains what we do and why it matters in this climate.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Hudson Bend
Chimney repair in Hudson Bend starts with houses built between the 1970s and 1990s, many of them masonry fireplaces that have absorbed decades of Hill Country humidity and a few hard freezes. The damage we see most often is not from overuse but from water: cracked crown mortar, rusted dampers, and flue tiles with hairline fractures that let heat and gases reach combustible framing. Because so many Hudson Bend homes are rentals or weekend properties, the fireplace can sit for months between uses, and small problems turn into structural ones without anyone noticing. We handle the full scope of repair with professional-grade materials, not hardware-store substitutes. Chimney Repair is one of our three core services, alongside sweeping and dryer vent safety.
Chimney Cap Installation
Signs you need it
You see birds, squirrels, or wasps entering the flue, or water stains on the ceiling near the chimney after rain.
What it costs in Hudson Bend
Chimney cap installation in Hudson Bend typically runs $190 to $500, depending on flue size and whether we’re capping a single flue or a multi-flue chase.
How we do it
We measure the flue opening, select a stainless steel or copper cap sized for the tile, and secure it with mechanical fasteners so it stays put in Hill Country wind.
Chimney Crown Repair
Signs you need it
The concrete crown on top of your chimney has visible cracks, spalling, or pieces missing, and water is getting into the masonry below.
What it costs in Hudson Bend
Chimney crown repair in Hudson Bend typically runs $250 to $750, with the higher end covering full crown rebuilds on larger masonry chimneys.
How we do it
We remove deteriorated crown material, build a properly sloped crown with a drip edge, and seal it so water sheds away from the flue instead of pooling.
Chimney Liner Installation
Signs you need it
Your flue tiles are cracked, spalled, or missing, or you smell smoke or fumes in the house during and after a fire.
What it costs in Hudson Bend
Chimney liner installation in Hudson Bend typically runs $1,800 to $4,500, depending on chimney height, access, and whether we’re relining with a DuraFlex stainless system or restoring with HeatShield.
How we do it
We inspect the existing flue with a camera, size the liner to the appliance and flue dimensions, and install a continuous stainless liner or HeatShield-resurfaced flue wall, then verify draft.
What Chimney Repair Costs in Hudson Bend
| Item | Typical range in Hudson Bend |
|---|---|
| Chimney cap installation | $190 – $500 |
| Chimney crown repair | $250 – $750 |
| Chimney liner installation | $1,800 – $4,500 |
Can you repair a chimney the same day you inspect it?
Often, yes. Smaller jobs like a cap or crown patch are usually done in one visit. Liner work requires ordering materials sized to your flue, so that takes longer. We give you a written scope and timeline before any work starts.
Do I need a permit for chimney repair in Hudson Bend?
Most repair work like caps, crowns, and liner resurfacing does not require a permit. Structural rebuilds above the roofline can trigger a Travis County review. We can tell you at the inspection whether your job is routine. Call (866) 472-2513 and we’ll walk you through it.
Brands We Service in Hudson Bend
In Hudson Bend, we install and service DuraFlex stainless liner systems, HeatShield liner resurfacing, Gelco caps, and Olympia Chimney components. These are professional trade brands, the same ones chimney contractors use on commercial jobs. If we need a part for your chimney, we stock the common sizes locally and can have specialty Components in within a week. Our brands page has the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Hudson Bend, TX
| Service | Typical range in Hudson Bend |
|---|---|
| Chimney sweep | $180 – $340 |
| Chimney cap installation | $190 – $500 |
| Chimney crown repair | $250 – $750 |
| Chimney liner installation | $1,800 – $4,500 |
| Chimney flashing repair | $300 – $700 |
| Dryer vent cleaning | $120 – $250 |
| Chimney inspection | $150 – $350 |
Prices in Hudson Bend run higher than Austin averages when a chimney is on a steep lakefront slope that makes scaffold setup slow, or when the home is a rental that needs scheduling around bookings. Every quote is a flat price agreed before we start, with no surprises after the work is done.
Neighborhoods We Serve in Hudson Bend
Oakgrove Chimney Sweep handles chimney repair, sweeping, and dryer vent work throughout the 78645 zip code and the lakefront communities around it. We’re on this side of Lake Travis regularly, and we schedule service calls to Hudson Bend throughout the week.
- Lakeway
- Hudson Bend proper
- The Peninsula
- Volente
- Apache Shores
Response time for most Hudson Bend appointments is within two to three business days, and we can often work around a rental turnover schedule if you call a week ahead.
Service Area – Cities Near Hudson Bend
Oakgrove Chimney Sweep also covers communities within a short drive of Hudson Bend, including Jonestown, TX, Lago Vista, TX, and Briarcliff, TX on the north side of the lake, plus Bee Cave, TX to the south. If you own a rental or lake house anywhere around Lake Travis, we can likely help.
Serving Hudson Bend, TX — Our Local Coverage Area
We’re based in the Hudson Bend area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Hudson Bend
Most Hudson Bend appointments are scheduled within two to three business days. If you manage a rental and need work done before a guest check-in, call (866) 472-2513 and we’ll do our best to fit your turnover window.
Some lakefront communities in the 78645 area have architectural review rules for anything visible from the street, especially caps and crowns. We install standard stainless and copper caps that satisfy most HOA requirements, and we can advise you if your neighborhood has specific rules. Call us and we’ll check.
Yes. A large share of our Hudson Bend work is on second homes and vacation rentals. We schedule around your usage, document everything with photos, and give you a written report so you know exactly what was done even if you were not on site.
If your Hudson Bend chimney needs repair, a sweep, or a dryer vent check before the next guest arrives, call Oakgrove Chimney Sweep at (866) 472-2513 for a free estimate. We repair what we find, and we tell you plainly when something can safely wait.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hudson Bend Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Alma Salazar"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Neil Novak"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Adriana Delgado