Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Barton Creek, TX
Chimney repair in Barton Creek usually means working on tall masonry fireplaces set into limestone and stucco exteriors, where the job is as much about preserving the finish as fixing the flue. Oakgrove Chimney Sweep has served Barton Creek since 2017, and we’re the crew homeowners call when a sweep turns up cracked flue tiles, a rusted-out cap, or flashing that’s letting Hill Country rain into the chase. Most houses here were built between the 1990s and 2010s, so we see the same set of aging issues across 78716: worn crowns, corroded caps, and liners that were never quite right for the fireplace they serve. Call (866) 472-2513 when you need a straight answer about what’s actually wrong and what it takes to fix it.
Why Barton Creek Homes Are Different
Barton Creek’s housing stock runs large: 3,000 to 8,000-plus square feet, custom Mediterranean and Hill Country designs, and fireplaces built as architectural centerpieces rather than afterthoughts. That changes the work. A chimney on a two-story limestone home here often has a long, complicated flue run with multiple tiles and offsets that hold creosote and debris differently than a simple straight pipe. We routinely work around stucco and limestone veneer, which means every repair has to be done with an eye toward not chipping, staining, or scarring the surround. The Central Texas climate adds another layer: mild winters mean fireplaces get light, occasional use, so creosote buildup is usually thin and sooty rather than heavily glazed. But the long oak-pollen and dust season fills caps and flues with fine debris, and Hill Country wind keeps live oak leaves moving all year. In practice, a Barton Creek chimney often needs a cap-clearing and flue inspection more than a heavy scrape, but the tall runs and custom finishes mean the work still calls for a specialist’s touch.
Styles & brands we work with
Our Main Barton Creek Services
Most Barton Creek homeowners first call us for one of two reasons: a chimney that hasn’t been swept in a few seasons, or a dryer vent that’s been quietly building lint for years. Both are fire-safety services, and both get the same diagnostic attention from our crew.
Chimney Sweep in Barton Creek
Our sweep in Barton Creek starts with the cap and spark arrestor, because that’s where Hill Country oak leaves and pollen collect first. We remove debris, run the brush up through the flue, and check the liner, crown, and flashing as we go. Tall masonry chimneys with multiple offsets take longer than a standard ranch house, and we schedule time for that. When we find a problem, we photograph it, show you, and quote the repair on the spot. Learn more about Chimney Sweep in Barton Creek.
Dryer Vent Cleaning in Barton Creek
Dryer vents in Barton Creek run long, and in a custom home they often route through finished ceilings or tight chases where lint accumulates quietly. We treat dryer vent cleaning as a fire-safety job, not a side task. Our technicians understand combustion pathways and push proper airflow through the full run. If the vent has been skipped for years, we’ll show you the lint we pull. Learn more about Dryer Vent Cleaning in Barton Creek.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Barton Creek
Chimney repair in Barton Creek typically falls into two camps: damage from Texas weather cycles and damage from years of deferred maintenance. The freeze-thaw cycle here is milder than up north, but it’s enough to crack a poorly poured crown or let water into a mortar joint, and once moisture gets behind limestone or stucco, the repair stops being optional. Oakgrove Chimney Sweep is a full-service chimney contractor, which means what we find during a sweep, we can fix ourselves. No handing you off to a mason who doesn’t know flue systems. That’s the whole point of Chimney Repair done by one company: single accountability from the first inspection to the final fire.
Chimney Cap Installation
Signs you need it
Your chimney has no cap at all, or the existing cap is rusted through, letting rain, birds, and Hill Country debris drop straight into the flue.
What it costs in Barton Creek
Chimney cap installation in Barton Creek typically runs $180 to $450 depending on the flue size and cap material.
How we do it
We measure the flue, select a stainless or copper cap sized correctly for the tile, and mount it so the mesh keeps animals out without choking draft.
Chimney Liner Installation
Signs you need it
Your flue tiles are cracked, spalling, or missing, or a past inspection flagged gaps that let heat and combustion gases reach the surrounding masonry.
What it costs in Barton Creek
Chimney liner installation in Barton Creek typically starts around $2,500 and runs up to $5,500 for taller custom flue runs.
How we do it
We measure the existing flue, run a new DuraFlex stainless liner down the chimney, insulate as needed, and secure the top plate and cap before testing draft.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the fireplace, or the flashing where the chimney meets the roof is lifting, rusted, or pulling away from the mortar.
What it costs in Barton Creek
Flashing repair in Barton Creek typically runs $450 to $900 depending on how much of the roofline flashing has to be removed and replaced.
How we do it
We remove the old flashing, clean the seam, install new step or counter flashing, and seal the joint so water from Hill Country storms can’t find a way in.
Chimney Crown Repair
Signs you need it
The concrete crown at the top of your chimney is cracked, crumbling, or scooped in a way that pools water instead of shedding it.
What it costs in Barton Creek
Crown repair in Barton Creek typically runs $750 to $1,500 for a full recast and seal on a standard masonry chimney.
How we do it
We chip out the failing concrete, form a new crown with the proper slope, and apply a waterproof seal so freeze-thaw cycles don’t crack it again.
What Chimney Repair Costs in Barton Creek
| Item | Typical range in Barton Creek |
|---|---|
| Chimney cap installation | $180 – $450 |
| Chimney crown repair | $750 – $1,500 |
| Chimney flashing repair | $450 – $900 |
Can you repair my chimney the same day as a sweep?
In many cases, yes. If you need a cap or minor crown work and we have the part on the truck, we’ll do it the same visit. Larger liner jobs are scheduled separately after we’ve confirmed measurements. Call (866) 472-2513 to ask about your specific situation.
Do I really need a new liner, or can the old one wait?
If flue tiles are cracked or missing, the answer is usually no, it can’t wait. A damaged liner lets heat and gases reach combustible framing. We’ll show you photos from the camera inspection so you can see exactly what we’re seeing before you decide.
Brands We Service in Barton Creek
We stock and install parts from Famco, Copperfield, DuraFlex, and HeatShield, the same suppliers chimney contractors use, not hardware-store substitutes. That means common cap, flashing, and liner components are usually on the truck or a day out. See our brands for the full range.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Barton Creek, TX
| Service | Typical range in Barton Creek |
|---|---|
| Chimney sweep | $180 – $340 |
| Dryer vent cleaning | $120 – $220 |
| Chimney cap installation | $180 – $450 |
| Chimney cap replacement | $180 – $450 |
| Chimney liner installation | $2,500 – $5,500 |
| Chimney flashing repair | $450 – $900 |
| Chimney crown repair | $750 – $1,500 |
Tall custom flue runs and hard-to-reach rooflines push pricing toward the upper end in Barton Creek, and that’s honest. We quote a flat price before any work starts, so the number we agree on is the number you pay.
Neighborhoods We Serve in Barton Creek
We work throughout the 78716 ZIP, from the gated communities off Barton Creek Boulevard to the custom homes tucked behind the country club and along the creek corridors. Most of our Barton Creek appointments are scheduled within a few days, and we can often work around HOA fence and access rules without slowing you down.
- Barton Creek Lakeside
- Barton Creek West
- The Estates of Barton Creek
- Mirador
- Senna Hills
Service Area – Cities Near Barton Creek
Oakgrove Chimney Sweep covers the communities around Barton Creek as part of our regular Austin-area route. We serve Lost Creek, TX, West Lake Hills, TX, Rollingwood, TX, and the broader Austin, TX area, including the hillside homes west of MoPac where our crews spend most of their week.
Serving Barton Creek, TX — Our Local Coverage Area
We’re based in the Barton Creek area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Barton Creek
Sometimes. Many Barton Creek communities require approval for visible exterior changes like caps or crowns. Interior work, including sweeps and liner installation, rarely needs HOA sign-off. We can note the specs your board will ask for so the approval process goes faster.
Most sweep and inspection appointments can be booked within a week, and we keep a few slots each week for urgent leak or animal issues. For time-sensitive damage, call (866) 472-2513 and we’ll tell you the earliest available time in real terms.
Yes. We cover all of 78716, from the hillside lots along Barton Creek Boulevard to the cul-de-sac builds near the golf course. If you’re in Barton Creek and within the ZIP, you’re on our route.
For an honest assessment, a flat quote, and work done by one crew that sweeps, inspects, and repairs under one roof, call Oakgrove Chimney Sweep at (866) 472-2513. We’ll tell you what’s actually going on in your flue, show you the photos, and fix what we find.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Barton Creek Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Adriana Delgado"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Dustin Barrett"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Steve Doyle