Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Wells Branch, TX
Most chimney repairs in Wells Branch start the same way: a fireplace that hasn’t been lit in years gets inspected before a home sale, or during the first cold snap someone finally tries to build a fire and the room fills with smoke. Oakgrove Chimney Sweep has served Wells Branch since 2017, and the bulk of our repair work here traces back to original 1980s and 90s builder-grade fireplaces that were installed correctly for their era but have simply aged past their service life. Cracked crowns, rusted dampers, missing caps, and deteriorated mortar joints are the norm, not the exception. If you suspect your flue has a problem, call (866) 472-2513 and we’ll tell you exactly what we find.
Why Wells Branch Homes Are Different
Wells Branch is a master-planned MUD community built out mostly between the mid-1980s and late 1990s. That matters for chimney work because a large share of the original fireplaces and factory-built metal flues are still in service, and many have never been updated with the modern caps, liners, and crown treatments we install today. The homes are tightly clustered subdivisions with shallow setbacks and HOA design standards, which means repairs that are visible from the street, like chimney caps or crown work, often need to match the neighborhood’s overall look. We’re familiar with that reality and carry cap and crown materials that blend with the existing masonry.
Central Texas weather works against these older fireplaces in a specific way. Wells Branch sits on clay-heavy soils that shift with the wet-dry cycle, and subtle foundation movement shows up as hairline cracks in chimney crowns and mortar joints. Those cracks let water in, and the humidity does the rest. We see rusted dampers and fireboxes in homes where the fireplace was never heavily used, which surprises homeowners until we explain that moisture, not fire, is what ages a masonry chimney fastest here. It’s the chimney you never burn that often needs the most repair.
Styles & brands we work with
Our Main Wells Branch Services
Most calls to Oakgrove Chimney Sweep from Wells Branch homeowners come in for one of two reasons: a chimney that needs to be swept and inspected, or a dryer vent that’s never been cleaned since the home was built. Both are combustion-pathway safety services, and both are jobs we handle as a full-service chimney specialist, not a hand-off to another company.
Chimney Sweep in Wells Branch
A chimney sweep in Wells Branch is rarely a quick brushing. Because so many fireplaces here sat dormant for years, the first cleaning often means removing hardened creosote and wildlife debris, not just light soot. Squirrels and birds find their way into uncapped flues all across the community, and their nesting material is a fire hazard that has to come out before the flue is safe. We combine every sweep with a full camera inspection so you see what we see, and if we find structural problems during the cleaning, we can typically schedule the repair right then. For the full picture on sweeping in this area, read our Chimney Sweep in Wells Branch page.
Dryer Vent Cleaning in Wells Branch
Dryer vents in Wells Branch homes run through walls and attics, and in a tight 90s-era subdivision with small lots, many vent runs are longer than they should be, with multiple elbows that trap lint. Lint is the fire risk, and it builds up silently. Our crews are combustion-pathway specialists, which means we approach a dryer vent the way we approach a flue, checking not just the blockage but the entire path from dryer to exterior termination. That’s a different level of thoroughness than a generic duct-cleaning technician. Details and what to expect are on the Dryer Vent Cleaning in Wells Branch page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Wells Branch
Chimney repair in Wells Branch usually comes down to water damage that was never addressed because the fireplace wasn’t used often enough for anyone to notice. The original masonry and metal components on 1980s and 90s homes are now 30 to 40 years old, and the Central Texas humidity has been quietly rusting dampers and eroding mortar the entire time. Oakgrove Chimney Sweep repairs what we find, not what a coupon company tells you, and every repair starts with a camera inspection so you see the problem before we touch it. If you need Chimney Repair work in Wells Branch, here’s what we typically handle.
Chimney Cap Installation
Signs you need it
You hear animals or see nesting material inside the flue, or you can see daylight from below through an open, uncovered stack.
What it costs in Wells Branch
Chimney cap installation in Wells Branch typically runs $180 to $450 depending on flue size and whether the cap is standard galvanized, stainless, or a decorative copper model to match the neighborhood’s look.
How we do it
We measure the flue, select a correctly sized Gelco or Olympia Chimney cap, and mount it with mechanical fasteners or a secure slip-in base so it stays put through Texas storms.
Chimney Cap Replacement
Signs you need it
Your existing cap is rusted through, blown off, bent, or sized wrong for the flue, leaving gaps that let rain and wildlife in.
What it costs in Wells Branch
Replacing a damaged chimney cap in Wells Branch falls between $200 and $500 depending on the cap style and material, plus any minor masonry work needed to seat it correctly.
How we do it
We remove the old cap, inspect the crown beneath it for damage, and install a properly sized replacement, from our stocked brands like Famco or Gelco, sealed against the local wind-driven rain pattern.
Chimney Liner Installation
Signs you need it
Your flue tiles are cracked, spalling, or missing, or your camera inspection shows gaps between tiles where heat and gases can escape into the chimney chase.
What it costs in Wells Branch
A new chimney liner in Wells Branch typically costs $850 to $3,200 depending on flue length, diameter, and whether we’re relining with a stainless flexible system or resurfacing an adjoining flue with HeatShield.
How we do it
We run a camera inspection to measure the exact liner path, then install a professional-grade stainless liner system, often with insulation, and reconnect the appliance or fireplace to code.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the fireplace, dampness on the chimney chase, or visible gaps and lifted flashing where the roof meets the masonry.
What it costs in Wells Branch
Chimney flashing repair in Wells Branch runs $300 to $900 depending on whether we’re resealing existing flashing or cutting and installing new custom step flashing on a roof with a steeper pitch.
How we do it
We strip the old sealant, inspect the flashing for punctures or short laps, and install or reseal a watertight barrier using professional-grade materials rated for Texas heat and UV exposure.
Chimney Crown Repair
Signs you need it
Your crown, the concrete slab on top of the chimney, has visible cracks, is crumbling, or has a dip that lets water pool instead of running off.
What it costs in Wells Branch
Crown repair in Wells Branch ranges from $350 to $850 for a resurfaced crown, with full crown rebuilds running up to $1,500 if the original was too thin and structurally failing.
How we do it
We clean and prep the crown, fill and seal cracks with a flexible crown coat, and when the old crown is beyond saving, we form and pour a new one with a proper drip edge.
What Chimney Repair Costs in Wells Branch
| Item | Typical range in Wells Branch |
|---|---|
| Chimney cap installation | $180 – $450 |
| Chimney cap replacement | $200 – $500 |
| Chimney liner installation | $850 – $3,200 |
| Chimney flashing repair | $300 – $900 |
| Chimney crown repair | $350 – $1,500 |
Can you repair a chimney without a full rebuild in Wells Branch?
In most Wells Branch homes, yes. Cracked crowns, failing flashing, rusted caps, and damaged liners are repairs we address individually, and full rebuilds are rare. A camera inspection tells us whether the structural masonry is sound or if restoration is needed before a partial repair makes sense.
Does Oakgrove Chimney Sweep repair chimneys found during a sweep?
Yes. We repair what we find. That’s the point of a full-service chimney company. If a sweep uncovers a cracked flue tile or a failed cap, we can usually get the repair on the schedule within the week, often using materials from our stocked professional supply rather than waiting on a hardware-store order.
Brands We Service in Wells Branch
In Wells Branch we install and service HeatShield liner restoration systems, Gelco caps and covers, Olympia Chimney flashing components, and Famco venting products. Our van carries the most common sizes and models for 1980s and 90s-era flues, which means many cap and flashing replacements happen in a single visit. See our brands for the full line we stock.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Wells Branch, TX
| Service | Typical range in Wells Branch |
|---|---|
| Chimney sweep (standard masonry) | $150 – $250 |
| Chimney sweep (prefab/metal flue) | $175 – $300 |
| Chimney cap installation | $180 – $450 |
| Chimney cap replacement | $200 – $500 |
| Chimney liner installation | $850 – $3,200 |
| Chimney flashing repair | $300 – $900 |
| Chimney crown repair | $350 – $1,500 |
| Dryer vent cleaning | $125 – $225 |
Costs go up in Wells Branch when a flue hasn’t been opened in years and wildlife debris has to be removed by hand, or when a cap must be matched to an HOA-approved look. The price we quote before we start is the price you pay, and nothing gets recommended unless the camera shows it on screen.
Neighborhoods We Serve in Wells Branch
We work throughout the 78728 zip code and every subdivision inside Wells Branch, including the streets off Wells Port Drive, the area around the recreation center, and the homes near Wells Branch Parkway. Most of our calls here get scheduled within a few days, and we can often fit an inspection in the same week when a sale is pending.
- Wells Branch proper
- Wells Branch MUD neighborhoods
- Streets surrounding Katherine Fleischer Park
- Subdivisions off Merrilltown Drive
- Homes along Wells Branch Parkway
Service Area – Cities Near Wells Branch
Our crews cover Wells Branch and the surrounding Austin-area communities. You’ll find us in Anderson Mill, TX most days, since that’s our home base, and we regularly schedule work in Jollyville, TX, Pflugerville, TX, and Windemere, TX. If you’re just outside the Wells Branch line, call us and we’ll confirm the next available appointment.
Serving Wells Branch, TX — Our Local Coverage Area
We’re based in the Wells Branch area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Wells Branch
Most Wells Branch appointments are scheduled within three to five business days, and inspections for pending home sales get priority because closing dates don’t move. If your flue has visible damage or an animal inside, mention that when you call and we’ll do our best to get a crew out sooner.
Some Wells Branch subdivisions require approval for exterior changes like chimney caps, particularly if the cap is visible from the street or differs from the original spec. We keep our cap and crown work neutral and code-compliant, and we can provide the spec sheet you’ll need for an HOA submission if yours requires one.
Yes. One crew inspects, diagnoses with a camera, and then completes the repair. You are not handed a report and told to find another contractor. The same company sweeps, inspects, and repairs, which means the person who saw the problem is the person who fixes it.
If your fireplace has sat unused for years, the time to find out what’s in the flue is before you light it, not after. Call Oakgrove Chimney Sweep at (866) 472-2513 for a free estimate and a straight answer about what your Wells Branch chimney actually needs.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wells Branch Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Dustin Barrett"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Steve Doyle"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Hector Garcia